High strain rate compressive response of the Cf/SiC composite

Carbon fiber reinforced ceramic owns the properties of lightweight, high fracture toughness, excellent shock resistance, and thus overcomes ceramic's brittleness. The researches on the advanced structure of astronautics, marine have exclusively evaluated the quasi-static mechanical response of carbon fiber reinforced ceramics, while few investigations are available in the open literature regarding elastodynamics. This paper reports the dynamic compressive responses of a carbon fiber reinforced silicon carbide (C_f/SiC) composite (CFCMC) tested by the material test system 801 machine (MTS) and the split Hopkinson pressure bar (SHPB). These tests were to determine the rate dependent compression response and high strain rate failure mechanism of the C_f/SiC composite in in-plane and out-plane directions. The in-plane compressive strain rates are from 0.001 to 2200?s^?1, and that of the out-plane direction are from 0.001 to 2400?s^?1. The compressive stress-strain curves show the C_f/SiC composite has a property of strain rate sensitivity in both directions while under high strain rate loadings. Its compressive stiffness, compressive stress, and corresponding strain are also strain rate sensitive. The compressive damage morphologies after high strain rate impacting show different failure modes for each loading direction. This study provides knowledge about elastodynamics of fiber-reinforced ceramics and extends their design criterion with a reliable evaluation while applying in the scenario of loading high strain rate.     

Preparation of manganese monoxide@reduced graphene oxide nanocomposites with superior electrochemical performances for lithium-ion batteries

Manganese monoxide (MnO) nanowire@reduced graphene oxide (rGO) nanocomposites are synthesized using a simple hydrothermal method combined with a calcination process. The structural and morphological characterization of the composites indicates that the MnO nanowires homogeneously anchor on both sides of the cross-linked rGO. The nanocomposites exhibit a high surface area of 126.5?m² g^?1. When employed as an anode material for lithium-ion batteries, the nanocomposites exhibit a reversible capacity of 1195 mAh g^?1 at a current density of 0.1?A?g^?1, with a high charge-discharge efficiency of 99.2% after 150 cycles. The three-dimensional architecture of the present materials exhibits high porosity and electron conductivity, significantly shortening the diffusion path of lithium ions and accelerating their reaction with the electrolyte, which greatly improves the lithium-ion storage properties. These excellent electrochemical performances make the composite a promising electrode material for lithium-ion batteries.     

无损检测技术在水利工程质量检测中的应用

当前,水利项目不仅可满足人们的需求,而且越来越关注多样化发展.为提高项目质量,有必要充分研究无损检测技术的功能和作用.对液压结构的全面测试可最大限度地减少对液压结构的不利影响,并扩大液压结构的使用范围,在此基础上,对无损检测技术在水利工程质量检测中的应用进行了研究.     

In-situ measurement of reflection coefficient and its application to predicting combustion instability in a gas turbine combustor

Journal of Mechanical Science and Technology - Here, a procedure that uses in-situ data recorded by two microphones placed inside an operating gas turbine combustor to determine the reflection...     

Electrocaloric effect and pyroelectric energy harvesting in diffuse ferroelectric Ba(Ti 1-x Ce x )O 3 ceramics

In the present work Ba(Ti1-xCex)O3 ceramics are prepared through a standard solid-state sintering process. Crystal structures, dielectric properties, ferroelectric properties and electrocaloric...     

Validation of avenanthramide and other phenolic compounds in oats and sprouted oats and their antimicrobial properties against Escherichia coli O157:H7

Food Science and Biotechnology - Oat contains a variety of phenolic compounds, including avenanthramides, which are found only in oats. This study was conducted to establish the quantitative...     

Heterogeneous Bimetallic Mo-NiPx/NiSy as a Highly Efficient Electrocatalyst for Robust Overall Water Splitting

Highly efficient electrocatalysts composed of earth-abundant elements are desired for water-splitting to produce clean and renewable chemical fuel. Herein, a heteroatomic-doped multi-phase Mo-doped nickel phosphide/nickel sulfide (Mo-NiP_x/NiS_y) nanowire electrocatalyst is designed by a successive phosphorization and sulfuration method for boosting overall water splitting (both oxygen and hydrogen evolution reactions (HER)) in alkaline solution. As expected, the Mo-NiP_x/NiS_y electrode possesses low overpotentials both at low and high current densities in HER, while the Mo-NiP_x/NiS_y heterostructure exhibits high active performance with ultra-low overpotentials of 137, 182, and 250 mV at the current density of 10, 100, and 400 mA cm⁻² in 1 m KOH solution, respectively, in oxygen evolution reaction. In particular, the as-prepared Mo-NiP_x/NiS_y electrodes exhibit remarkable full water splitting performance at both low and high current densities of 10, 100, and 400 mA cm⁻² with 1.42, 1.70, and 2.36 V, respectively, which is comparable to commercial electrolysis.     

高阶表面结构刚挠结合印制板制作技术

高阶表面结构刚挠结合印制电路板集合了混压设计,不对称设计等特点,且挠性板在外层,导致开窗处高度差较大,这一特点给制作增添了较大难度。本文选取此类典型刚挠结合板产品,分享部分关键制作技术。     

Formation of SiC whiskers/leucite-based ceramic composites from low temperature hardening geopolymer

In this study, SiC whiskers (SCWS) reinforced geopolymer composites (SCWS/KGP) and their ceramic products (SCWS/leucite) were prepared, and effects of SiC whiskers contents on the microstructure and flexural strength of the SCWS/KGP and SCWS/leucite composites were investigated. The results show that the whisker addition has little influence on both phase composition and thermal shrinkage of the KGP composites, but a suitable content of whisker will result in the improved flexural strength, and when the SCWS content is 2 wt%, flexural strength of the SCWS/KGP composite is enhanced by 95% compared with the neat geopolymer. The flexural strength of the composites can be further enhanced significantly after the composites being treated at 1100 °C and 1200 °C and flexural strength of the composite with SCWS content of 2 wt% was 107% and 125% higher than the untreated counterpart, respectively. The increase in flexural strength of the composites should be attributed to the strong leucite formation, whisker debonding and pulling out from matrix during the fracturing process based on the good interfacial bonding state between whisker and leucite matrix.